• so05
  • so04
  • so03
  • so02
  • instagram

Mechanical Rotary Counter

  • JZ095B Series 5-digit Rotary Counter With Lever Reset

    JZ095B Series 5-digit Rotary Counter With Lever Reset

    Working principle & Introduction: JZ095B 5 digit Mechanical Counter is used to measure rotation speed of various machineries, the length and flow amount of finished products and to measure the depth and height etc. It is widely applied in machinery, metallurgy light industry and printing & dyeing etc. It is a necessary tool for measuring and recording.

  • J116-001 Series 6-digit Revolution Counter With Button Reset#rotation mechanical counter

    J116-001 Series 6-digit Revolution Counter With Button Reset#rotation mechanical counter

    6-digit Mechanical Rotation Counter, the counting value is added 1,2,5,10 when the active axis rotates one round anticlockwise. With reset button, the counting wheel can reset simultaneously. The figure of the counting wheel can be used to measure the rotation speed of various machinery and to measure length, depth and flow amount etc., and it is widely applied in machinery, wire-making, tape-making and printing etc.

  • J250 Series Preset Revolution Counter#rotation mechanical counter

    J250 Series Preset Revolution Counter#rotation mechanical counter

    Working principle & Introduction:5-digit Mechanical Reset Counter mainly divided into two categories of rotation type and pulling type, suitable for controlling the rotation or operation of machines or instruments. Pushing down the left button , the required figures can be input into the counter by pressing the rest 5 buttons in sequence, loosen the left button the counter will indicate the selected figures. With reset, when the digit display of the counter reach to 00000, the counter send a signal to control the machine to stop working.

  • J115-001 Series Textile Mechanical Counter

    J115-001 Series Textile Mechanical Counter

    Working principle & Introduction: With the rotation of the input axis, the counter drives the internal worm, worm gear and gear mechanism to display the rotation rounds on the 4 groups of decimal counting wheels, which are controlled by a division adjusting knob. When the division adjusting knob indicates “A”, the input axis rotates, and the group A counting wheels count. If the adjusting knob is adjusted to B, C and D respectively, the counting wheel group to which the adjusting knob points will display the rotation rounds of the input axis. This counter can only be used to carry out accumulative adding, it has no reset mechanism. It can be used to record the output of different shifts on the same machine, and mainly applied in the looms and tape weaving machines with multi-shifts, in textile industry.

  • JZ067B Series Rotary Counter

    JZ067B Series Rotary Counter

    Working principle & Introduction: JZ067B Series Mechanical Rotation Counter is a kind of counter for flow meter, this counter is driven by worm, realizing to count. It can also be used as a kind of general mechanical rotation counter for accumulative counting of various data measuring. Widely applied in fuel dispenser.